Title 13 WATER AND SEWERS
Chapter 13.63 INSPECTION AND MODIFICATION
13.63.010 Inadequacy of existing systems.
13.63.020 Order for modification.
13.63.030 Completion notification.
13.63.040 Inspection and approval.
13.63.010 Inadequacy of existing systems.
When a sewage system serving a property to which the public is admitted,
either by license or by use, fails or is determined to be inadequate to prevent
the deposit or seepage of wastes upon the ground surface, the person, or
persons, firm, corporation or political subdivision controlling said property
shall, upon written order from the director, close the business or operation
until such time as the provisions of this article are complied with and the
corrective action has received clearance from the director. (Ord. 279 §
50, 1963).
13.63.020 Order for modification.
The director may order changes in the method, means, manner and place for
the disposal, treatment or discharge of sewage in order that the same shall not
constitute a menace to the health of human beings, or animals. The director
shall designate the period within which such changes are to be made. (Ord. 279
§ 51, 1963).
13.63.030 Completion notification.
Upon the completion of a sewage disposal system by an applicant to whom a
permit has been issued, he shall forthwith notify the department of such fact by
transmitting to the department a notice of completion prior to covering or using
said sewage disposal system. (Ord. 279 § 52, 1963).
13.63.040 Inspection and approval.
The department shall make such investigation and inspection after
completion as may be necessary to determine that the plans and specifications
approved in the permit and rules and regulations of this article have been
complied with. No sewage disposal system shall be covered, sealed or put in use
until a certificate of completion shall have been issued by the director. Said
certificate of completion shall be in the form prescribed by the director.
(Ord. 279 § 53, 1963).
<< previous | next >>