Title 18 ZONING*
Chapter 18.46 QMD--QUARRY, MINING AND DRILLING DISTRICT
18.46.010 Land use regulations.
18.46.020 Structure location regulations.
18.46.030 Structure height regulations.
18.46.040 Lot dimension regulations.
18.46.010 Land use regulations.
Land use regulations are:
A. Permitted Uses. Quarrying, mining, and
drilling except surface mining;
B. Uses Allowed with Zoning Permit. None
specified;
C. Uses Allowed with Conditional Use Permit.
1. Surface
mining,
2. Manufacturing,
3. Storage,
4. Recreation
area,
5. Dangerous or unusual devices or material manufacturing, testing and
storage,
6. Refuse disposal sites (See Chapter 18.94),
7. Cemeteries and
mausoleums (See Chapter 18.94),
8. Laboratories for testing, experimental or
analytical purposes. (See Chapter 18.94.) (Ord. 525 § 1(part),
1989).
18.46.020 Structure location regulations.
(See also Sections 18.98.010--18.98.090.)
Structure location
regulations are:
A. Setback from edge of right-of-way: _____ feet,
minimum
B. Side yard offset: _____ feet, minimum
C. Rear yard offset:
_____ feet, minimum
All locations of structures, ore, tailing, ponds,
equipment and similar things are subject to approval by the zoning agency
through conditional use permit. (Ord. 525 § 1(part), 1989).
18.46.030 Structure height regulations.
(See also Sections 18.98.100--18.98.130.)
Structure height regulations
are:
A. Principal building height:_____ feet, maximum
B. Accessory
building height:_____ feet, maximum
All structure heights over sixty feet
are subject to approval by the zoning agency through conditional use permit.
(Ord. 525 § 1(part), 1989).
18.46.040 Lot dimension regulations.
(See also Section 18.100.010.) Lot dimension regulations are:
A. Lot
area: __ square feet, minimum;
B. Average lot width: __ feet,
minimum;
C. Lot length to width ratio permitted __;
D. Dwelling floor
area to lot area ratio permitted: __ maximum;
E. Total buildings area to
lot area ratio permitted: twenty percent, maximum. Dwellings and commercial
uses are not permitted in this district. (Ord. 525 § 1(part),
1989).
<< previous | next >>